dmesg - All Installed Suite
Linux version 4.15.0-23-generic (buildd@lgw01-amd64-055) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #25-Ubuntu SMP Wed May 23 18:02:16 UTC 2018 (Ubuntu 4.15.0-23.25-generic 4.15.18)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000009d7ffff] usable
BIOS-e820: [mem 0x0000000009d80000-0x0000000009ffffff] reserved
BIOS-e820: [mem 0x000000000a000000-0x00000000dd307fff] usable
BIOS-e820: [mem 0x00000000dd308000-0x00000000dd3f5fff] reserved
BIOS-e820: [mem 0x00000000dd3f6000-0x00000000dd4e7fff] usable
BIOS-e820: [mem 0x00000000dd4e8000-0x00000000dd8b3fff] ACPI NVS
BIOS-e820: [mem 0x00000000dd8b4000-0x00000000de3e9fff] reserved
BIOS-e820: [mem 0x00000000de3ea000-0x00000000deffffff] usable
BIOS-e820: [mem 0x00000000df000000-0x00000000dfffffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fdf00000-0x00000000fdffffff] reserved
BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000021f37ffff] usable
NX (Execute Disable) protection: active
random: fast init done
SMBIOS 3.0 present.
DMI: Micro-Star International Co., Ltd MS-7B38/A320M PRO-VD PLUS (MS-7B38), BIOS 1.00 06/28/2017
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x21f380 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-through
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000C0000000 mask FFFFE0000000 write-back
3 base 0000DF000000 mask FFFFFF000000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000000220000000 aka 8704M
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
total RAM covered: 3568M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 1G num_reg: 3 lose cover RAM: 0G
e820: update [mem 0xdf000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xdf000 max_arch_pfn = 0x400000000
Scanning 1 areas for low memory corruption
Base memory trampoline at [ (ptrval)] 97000 size 24576
Using GB pages for direct mapping
BRK [0x2653f000, 0x2653ffff] PGTABLE
BRK [0x26540000, 0x26540fff] PGTABLE
BRK [0x26541000, 0x26541fff] PGTABLE
BRK [0x26542000, 0x26542fff] PGTABLE
BRK [0x26543000, 0x26543fff] PGTABLE
BRK [0x26544000, 0x26544fff] PGTABLE
BRK [0x26545000, 0x26545fff] PGTABLE
BRK [0x26546000, 0x26546fff] PGTABLE
BRK [0x26547000, 0x26547fff] PGTABLE
RAMDISK: [mem 0x31852000-0x34c20fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000DD4E8090 0000A4 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000DD4EDE68 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20170831/tbfadt-658)
ACPI: DSDT 0x00000000DD4E81D0 005C96 (v02 ALASKA A M I 01072009 INTL 20120913)
ACPI: FACS 0x00000000DD89DE00 000040
ACPI: APIC 0x00000000DD4EDF80 0000DE (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x00000000DD4EE060 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FIDT 0x00000000DD4EE0A8 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x00000000DD4EE148 008C4C (v02 AMD AMD ALIB 00000002 MSFT 04000000)
ACPI: SSDT 0x00000000DD4F6D98 001084 (v01 AMD AMD CPU 00000001 AMD 00000001)
ACPI: CRAT 0x00000000DD4F7E20 000850 (v01 AMD AMD CRAT 00000001 AMD 00000001)
ACPI: CDIT 0x00000000DD4F8670 000029 (v01 AMD AMD CDIT 00000001 AMD 00000001)
ACPI: SSDT 0x00000000DD4F86A0 0017D2 (v01 AMD AMD AOD 00000001 INTL 20120913)
ACPI: MCFG 0x00000000DD4F9E78 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: HPET 0x00000000DD4F9EB8 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
ACPI: SSDT 0x00000000DD4F9EF0 000024 (v01 AMDFCH FCHZP 00001000 INTL 20120913)
ACPI: UEFI 0x00000000DD4F9F18 000042 (v01 00000000 00000000)
ACPI: IVRS 0x00000000DD4F9F60 0000D0 (v02 AMD AMD IVRS 00000001 AMD 00000000)
ACPI: SSDT 0x00000000DD4FA030 0000F8 (v01 AMD AMD PT 00001000 INTL 20120913)
ACPI: SSDT 0x00000000DD4FA128 001664 (v01 AMD CPMCMN 00000001 INTL 20120913)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000021f37ffff]
NODE_DATA(0) allocated [mem 0x21f355000-0x21f37ffff]
tsc: Fast TSC calibration failed
tsc: Using PIT calibration value
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000021f37ffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009cfff]
node 0: [mem 0x0000000000100000-0x0000000009d7ffff]
node 0: [mem 0x000000000a000000-0x00000000dd307fff]
node 0: [mem 0x00000000dd3f6000-0x00000000dd4e7fff]
node 0: [mem 0x00000000de3ea000-0x00000000deffffff]
node 0: [mem 0x0000000100000000-0x000000021f37ffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000021f37ffff]
On node 0 totalpages: 2085036
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 14135 pages used for memmap
DMA32 zone: 904592 pages, LIFO batch:31
Normal zone: 18382 pages used for memmap
Normal zone: 1176448 pages, LIFO batch:31
Reserved but unavailable: 100 pages
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 10, version 33, address 0xfec01000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228201 base: 0xfed00000
smpboot: Allowing 16 CPUs, 8 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x09d80000-0x09ffffff]
PM: Registered nosave memory: [mem 0xdd308000-0xdd3f5fff]
PM: Registered nosave memory: [mem 0xdd4e8000-0xdd8b3fff]
PM: Registered nosave memory: [mem 0xdd8b4000-0xde3e9fff]
PM: Registered nosave memory: [mem 0xdf000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfdefffff]
PM: Registered nosave memory: [mem 0xfdf00000-0xfdffffff]
PM: Registered nosave memory: [mem 0xfe000000-0xfe9fffff]
PM: Registered nosave memory: [mem 0xfea00000-0xfea0ffff]
PM: Registered nosave memory: [mem 0xfea10000-0xfeb7ffff]
PM: Registered nosave memory: [mem 0xfeb80000-0xfec01fff]
PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: Registered nosave memory: [mem 0xfec11000-0xfec2ffff]
PM: Registered nosave memory: [mem 0xfec30000-0xfec30fff]
PM: Registered nosave memory: [mem 0xfec31000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
PM: Registered nosave memory: [mem 0xfed90000-0xfedc1fff]
PM: Registered nosave memory: [mem 0xfedc2000-0xfedcffff]
PM: Registered nosave memory: [mem 0xfedd0000-0xfedd3fff]
PM: Registered nosave memory: [mem 0xfedd4000-0xfedd5fff]
PM: Registered nosave memory: [mem 0xfedd6000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff]
PM: Registered nosave memory: [mem 0xfef00000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1
percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u262144
pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
Built 1 zonelists, mobility grouping on. Total pages: 2052434
Policy zone: Normal
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 8058848K/8340144K available (12300K kernel code, 2470K rwdata, 4240K rodata, 2408K init, 2416K bss, 281296K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
ftrace: allocating 39083 entries in 153 pages
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=16.
Tasks RCU enabled.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
NR_IRQS: 524544, nr_irqs: 1096, preallocated irqs: 16
spurious 8259A interrupt: IRQ7.
vt handoff: transparent VT on vt#1
Console: colour dummy device 80x25
console [tty0] enabled
ACPI: Core revision 20170831
ACPI: 7 ACPI AML tables successfully acquired and loaded
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
hpet clockevent registered
APIC: Switch to symmetric I/O mode setup
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
tsc: Fast TSC calibration failed
tsc: PIT calibration matches HPET. 1 loops
tsc: Detected 3499.603 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6999.20 BogoMIPS (lpj=13998412)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 23 MCE banks
LVT offset 1 assigned for vector 0xf9
LVT offset 2 assigned for vector 0xf4
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1536, 2MB 1536, 4MB 768, 1GB 0
Spectre V2 : Mitigation: Full AMD retpoline
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
Freeing SMP alternatives memory: 36K
smpboot: CPU0: AMD Ryzen 5 1500X Quad-Core Processor (family: 0x17, model: 0x1, stepping: 0x1)
Performance Events: Fam17h core perfctr, AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
Hierarchical SRCU implementation.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
#2 #3 #4 #5 #6 #7
smp: Brought up 1 node, 8 CPUs
smpboot: Max logical packages: 2
smpboot: Total of 8 processors activated (55993.64 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.apparmor
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xdd4e8000-0xdd8b3fff] (3981312 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 4096 (order: 6, 262144 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 6:06:41, date: 07/06/18
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1530857201.056:1): state=initialized audit_enabled=0 res=1
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
PCI: Using configuration type 1 for base access
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Executed 2 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 2 GPEs in block 00 to 1F
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfec2ffff window]
pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1022:1450] type 00 class 0x060000
pci 0000:00:00.2: [1022:1451] type 00 class 0x080600
pci 0000:00:01.0: [1022:1452] type 00 class 0x060000
pci 0000:00:01.1: [1022:1453] type 01 class 0x060400
pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
pci 0000:00:01.2: [1022:1453] type 01 class 0x060400
pci 0000:00:01.2: PME# supported from D0 D3hot D3cold
pci 0000:00:01.3: [1022:1453] type 01 class 0x060400
pci 0000:00:01.3: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [1022:1452] type 00 class 0x060000
pci 0000:00:03.0: [1022:1452] type 00 class 0x060000
pci 0000:00:03.1: [1022:1453] type 01 class 0x060400
pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: [1022:1452] type 00 class 0x060000
pci 0000:00:07.0: [1022:1452] type 00 class 0x060000
pci 0000:00:07.1: [1022:1454] type 01 class 0x060400
pci 0000:00:07.1: enabling Extended Tags
pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
pci 0000:00:08.0: [1022:1452] type 00 class 0x060000
pci 0000:00:08.1: [1022:1454] type 01 class 0x060400
pci 0000:00:08.1: enabling Extended Tags
pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
pci 0000:00:18.0: [1022:1460] type 00 class 0x060000
pci 0000:00:18.1: [1022:1461] type 00 class 0x060000
pci 0000:00:18.2: [1022:1462] type 00 class 0x060000
pci 0000:00:18.3: [1022:1463] type 00 class 0x060000
pci 0000:00:18.4: [1022:1464] type 00 class 0x060000
pci 0000:00:18.5: [1022:1465] type 00 class 0x060000
pci 0000:00:18.6: [1022:1466] type 00 class 0x060000
pci 0000:00:18.7: [1022:1467] type 00 class 0x060000
pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:01:00.0: reg 0x10: [io 0xf000-0xf0ff]
pci 0000:01:00.0: reg 0x18: [mem 0xfd900000-0xfd900fff 64bit]
pci 0000:01:00.0: reg 0x20: [mem 0xf2200000-0xf2203fff 64bit pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:01.1: PCI bridge to [bus 01]
pci 0000:00:01.1: bridge window [io 0xf000-0xffff]
pci 0000:00:01.1: bridge window [mem 0xfd900000-0xfd9fffff]
pci 0000:00:01.1: bridge window [mem 0xf2200000-0xf22fffff 64bit pref]
pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [io 0xe000-0xe0ff]
pci 0000:02:00.0: reg 0x18: [mem 0xfd800000-0xfd800fff 64bit]
pci 0000:02:00.0: reg 0x20: [mem 0xf2100000-0xf2103fff 64bit pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:01.2: PCI bridge to [bus 02]
pci 0000:00:01.2: bridge window [io 0xe000-0xefff]
pci 0000:00:01.2: bridge window [mem 0xfd800000-0xfd8fffff]
pci 0000:00:01.2: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
pci 0000:03:00.0: [1022:43bc] type 00 class 0x0c0330
pci 0000:03:00.0: reg 0x10: [mem 0xfd6a0000-0xfd6a7fff 64bit]
pci 0000:03:00.0: PME# supported from D3hot D3cold
pci 0000:03:00.1: [1022:43b8] type 00 class 0x010601
pci 0000:03:00.1: reg 0x24: [mem 0xfd680000-0xfd69ffff]
pci 0000:03:00.1: reg 0x30: [mem 0xfd600000-0xfd67ffff pref]
pci 0000:03:00.1: PME# supported from D3hot D3cold
pci 0000:03:00.2: [1022:43b3] type 01 class 0x060400
pci 0000:03:00.2: PME# supported from D3hot D3cold
pci 0000:00:01.3: PCI bridge to [bus 03-21]
pci 0000:00:01.3: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.3: bridge window [mem 0xfd500000-0xfd6fffff]
pci 0000:04:04.0: [1022:43b4] type 01 class 0x060400
pci 0000:04:04.0: PME# supported from D3hot D3cold
pci 0000:04:05.0: [1022:43b4] type 01 class 0x060400
pci 0000:04:05.0: PME# supported from D3hot D3cold
pci 0000:04:06.0: [1022:43b4] type 01 class 0x060400
pci 0000:04:06.0: PME# supported from D3hot D3cold
pci 0000:04:07.0: [1022:43b4] type 01 class 0x060400
pci 0000:04:07.0: PME# supported from D3hot D3cold
pci 0000:03:00.2: PCI bridge to [bus 04-21]
pci 0000:03:00.2: bridge window [io 0xd000-0xdfff]
pci 0000:03:00.2: bridge window [mem 0xfd500000-0xfd5fffff]
pci 0000:1e:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:1e:00.0: reg 0x10: [io 0xd000-0xd0ff]
pci 0000:1e:00.0: reg 0x18: [mem 0xfd504000-0xfd504fff 64bit]
pci 0000:1e:00.0: reg 0x20: [mem 0xfd500000-0xfd503fff 64bit]
pci 0000:1e:00.0: supports D1 D2
pci 0000:1e:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:04.0: PCI bridge to [bus 1e]
pci 0000:04:04.0: bridge window [io 0xd000-0xdfff]
pci 0000:04:04.0: bridge window [mem 0xfd500000-0xfd5fffff]
pci 0000:04:05.0: PCI bridge to [bus 1f]
pci 0000:04:06.0: PCI bridge to [bus 20]
pci 0000:04:07.0: PCI bridge to [bus 21]
pci 0000:22:00.0: [10de:128b] type 00 class 0x030000
pci 0000:22:00.0: reg 0x10: [mem 0xfc000000-0xfcffffff]
pci 0000:22:00.0: reg 0x14: [mem 0xe8000000-0xefffffff 64bit pref]
pci 0000:22:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
pci 0000:22:00.0: reg 0x24: [io 0xc000-0xc07f]
pci 0000:22:00.0: reg 0x30: [mem 0xfd000000-0xfd07ffff pref]
pci 0000:22:00.1: [10de:0e0f] type 00 class 0x040300
pci 0000:22:00.1: reg 0x10: [mem 0xfd080000-0xfd083fff]
pci 0000:00:03.1: PCI bridge to [bus 22]
pci 0000:00:03.1: bridge window [io 0xc000-0xcfff]
pci 0000:00:03.1: bridge window [mem 0xfc000000-0xfd0fffff]
pci 0000:00:03.1: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
pci 0000:23:00.0: [1022:145a] type 00 class 0x130000
pci 0000:23:00.0: enabling Extended Tags
pci 0000:23:00.2: [1022:1456] type 00 class 0x108000
pci 0000:23:00.2: reg 0x18: [mem 0xfd300000-0xfd3fffff]
pci 0000:23:00.2: reg 0x24: [mem 0xfd400000-0xfd401fff]
pci 0000:23:00.2: enabling Extended Tags
pci 0000:23:00.3: [1022:145c] type 00 class 0x0c0330
pci 0000:23:00.3: reg 0x10: [mem 0xfd200000-0xfd2fffff 64bit]
pci 0000:23:00.3: enabling Extended Tags
pci 0000:23:00.3: PME# supported from D0 D3hot D3cold
pci 0000:00:07.1: PCI bridge to [bus 23]
pci 0000:00:07.1: bridge window [mem 0xfd200000-0xfd4fffff]
pci 0000:24:00.0: [1022:1455] type 00 class 0x130000
pci 0000:24:00.0: enabling Extended Tags
pci 0000:24:00.2: [1022:7901] type 00 class 0x010601
pci 0000:24:00.2: reg 0x24: [mem 0xfd708000-0xfd708fff]
pci 0000:24:00.2: enabling Extended Tags
pci 0000:24:00.2: PME# supported from D3hot D3cold
pci 0000:24:00.3: [1022:1457] type 00 class 0x040300
pci 0000:24:00.3: reg 0x10: [mem 0xfd700000-0xfd707fff]
pci 0000:24:00.3: enabling Extended Tags
pci 0000:24:00.3: PME# supported from D0 D3hot D3cold
pci 0000:00:08.1: PCI bridge to [bus 24]
pci 0000:00:08.1: bridge window [mem 0xfd700000-0xfd7fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:22:00.0: vgaarb: setting as boot VGA device
pci 0000:22:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:22:00.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
EDAC MC: Ver: 3.0.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
e820: reserve RAM buffer [mem 0x09d80000-0x0bffffff]
e820: reserve RAM buffer [mem 0xdd308000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdd4e8000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
e820: reserve RAM buffer [mem 0x21f380000-0x21fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [mem 0xfeb80000-0xfebfffff] could not be reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x0a00-0x0a0f] has been reserved
system 00:03: [io 0x0a10-0x0a1f] has been reserved
system 00:03: [io 0x0a20-0x0a2f] has been reserved
system 00:03: [io 0x0a40-0x0a4f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: [dma 0 disabled]
pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:05: [dma 0 disabled]
pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:06: [io 0x04d0-0x04d1] has been reserved
system 00:06: [io 0x040b] has been reserved
system 00:06: [io 0x04d6] has been reserved
system 00:06: [io 0x0c00-0x0c01] has been reserved
system 00:06: [io 0x0c14] has been reserved
system 00:06: [io 0x0c50-0x0c51] has been reserved
system 00:06: [io 0x0c52] has been reserved
system 00:06: [io 0x0c6c] has been reserved
system 00:06: [io 0x0c6f] has been reserved
system 00:06: [io 0x0cd0-0x0cd1] has been reserved
system 00:06: [io 0x0cd2-0x0cd3] has been reserved
system 00:06: [io 0x0cd4-0x0cd5] has been reserved
system 00:06: [io 0x0cd6-0x0cd7] has been reserved
system 00:06: [io 0x0cd8-0x0cdf] has been reserved
system 00:06: [io 0x0800-0x089f] has been reserved
system 00:06: [io 0x0b00-0x0b0f] has been reserved
system 00:06: [io 0x0b20-0x0b3f] has been reserved
system 00:06: [io 0x0900-0x090f] has been reserved
system 00:06: [io 0x0910-0x091f] has been reserved
system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:06: [mem 0xfec01000-0xfec01fff] could not be reserved
system 00:06: [mem 0xfedc0000-0xfedc0fff] has been reserved
system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:06: [mem 0xfed80000-0xfed8ffff] could not be reserved
system 00:06: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:06: [mem 0xff000000-0xffffffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 7 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.1: PCI bridge to [bus 01]
pci 0000:00:01.1: bridge window [io 0xf000-0xffff]
pci 0000:00:01.1: bridge window [mem 0xfd900000-0xfd9fffff]
pci 0000:00:01.1: bridge window [mem 0xf2200000-0xf22fffff 64bit pref]
pci 0000:00:01.2: PCI bridge to [bus 02]
pci 0000:00:01.2: bridge window [io 0xe000-0xefff]
pci 0000:00:01.2: bridge window [mem 0xfd800000-0xfd8fffff]
pci 0000:00:01.2: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
pci 0000:04:04.0: PCI bridge to [bus 1e]
pci 0000:04:04.0: bridge window [io 0xd000-0xdfff]
pci 0000:04:04.0: bridge window [mem 0xfd500000-0xfd5fffff]
pci 0000:04:05.0: PCI bridge to [bus 1f]
pci 0000:04:06.0: PCI bridge to [bus 20]
pci 0000:04:07.0: PCI bridge to [bus 21]
pci 0000:03:00.2: PCI bridge to [bus 04-21]
pci 0000:03:00.2: bridge window [io 0xd000-0xdfff]
pci 0000:03:00.2: bridge window [mem 0xfd500000-0xfd5fffff]
pci 0000:00:01.3: PCI bridge to [bus 03-21]
pci 0000:00:01.3: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.3: bridge window [mem 0xfd500000-0xfd6fffff]
pci 0000:00:03.1: PCI bridge to [bus 22]
pci 0000:00:03.1: bridge window [io 0xc000-0xcfff]
pci 0000:00:03.1: bridge window [mem 0xfc000000-0xfd0fffff]
pci 0000:00:03.1: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
pci 0000:00:07.1: PCI bridge to [bus 23]
pci 0000:00:07.1: bridge window [mem 0xfd200000-0xfd4fffff]
pci 0000:00:08.1: PCI bridge to [bus 24]
pci 0000:00:08.1: bridge window [mem 0xfd700000-0xfd7fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfec2ffff window]
pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window]
pci_bus 0000:01: resource 0 [io 0xf000-0xffff]
pci_bus 0000:01: resource 1 [mem 0xfd900000-0xfd9fffff]
pci_bus 0000:01: resource 2 [mem 0xf2200000-0xf22fffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
pci_bus 0000:02: resource 1 [mem 0xfd800000-0xfd8fffff]
pci_bus 0000:02: resource 2 [mem 0xf2100000-0xf21fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xfd500000-0xfd6fffff]
pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:04: resource 1 [mem 0xfd500000-0xfd5fffff]
pci_bus 0000:1e: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:1e: resource 1 [mem 0xfd500000-0xfd5fffff]
pci_bus 0000:22: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:22: resource 1 [mem 0xfc000000-0xfd0fffff]
pci_bus 0000:22: resource 2 [mem 0xe8000000-0xf1ffffff 64bit pref]
pci_bus 0000:23: resource 1 [mem 0xfd200000-0xfd4fffff]
pci_bus 0000:24: resource 1 [mem 0xfd700000-0xfd7fffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:22:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 53052K
AMD-Vi: IOMMU performance counters supported
pci 0000:00:00.2: can't derive routing for PCI INT A
pci 0000:00:00.2: PCI INT A: not connected
iommu: Adding device 0000:00:01.0 to group 0
iommu: Adding device 0000:00:01.1 to group 1
iommu: Adding device 0000:00:01.2 to group 2
iommu: Adding device 0000:00:01.3 to group 3
iommu: Adding device 0000:00:02.0 to group 4
iommu: Adding device 0000:00:03.0 to group 5
iommu: Adding device 0000:00:03.1 to group 6
iommu: Adding device 0000:00:04.0 to group 7
iommu: Adding device 0000:00:07.0 to group 8
iommu: Adding device 0000:00:07.1 to group 8
iommu: Adding device 0000:00:08.0 to group 9
iommu: Adding device 0000:00:08.1 to group 9
iommu: Adding device 0000:00:14.0 to group 10
iommu: Adding device 0000:00:14.3 to group 10
iommu: Adding device 0000:00:18.0 to group 11
iommu: Adding device 0000:00:18.1 to group 11
iommu: Adding device 0000:00:18.2 to group 11
iommu: Adding device 0000:00:18.3 to group 11
iommu: Adding device 0000:00:18.4 to group 11
iommu: Adding device 0000:00:18.5 to group 11
iommu: Adding device 0000:00:18.6 to group 11
iommu: Adding device 0000:00:18.7 to group 11
iommu: Adding device 0000:01:00.0 to group 12
iommu: Adding device 0000:02:00.0 to group 13
iommu: Adding device 0000:03:00.0 to group 14
iommu: Adding device 0000:03:00.1 to group 14
iommu: Adding device 0000:03:00.2 to group 14
iommu: Adding device 0000:04:04.0 to group 14
iommu: Adding device 0000:04:05.0 to group 14
iommu: Adding device 0000:04:06.0 to group 14
iommu: Adding device 0000:04:07.0 to group 14
iommu: Adding device 0000:1e:00.0 to group 14
iommu: Adding device 0000:22:00.0 to group 15
iommu: Adding device 0000:22:00.1 to group 15
iommu: Adding device 0000:23:00.0 to group 8
iommu: Adding device 0000:23:00.2 to group 8
iommu: Adding device 0000:23:00.3 to group 8
iommu: Adding device 0000:24:00.0 to group 9
iommu: Adding device 0000:24:00.2 to group 9
iommu: Adding device 0000:24:00.3 to group 9
AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
AMD-Vi: Extended features (0xf77ef22294ada):
PPR NX GT IA GA PC GA_vAPIC
AMD-Vi: Interrupt remapping enabled
AMD-Vi: virtual APIC enabled
AMD-Vi: Lazy IO/TLB flushing enabled
amd_uncore: AMD NB counters detected
amd_uncore: AMD LLC counters detected
perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=21 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.26)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.1: AER enabled with IRQ 26
pcieport 0000:00:01.2: AER enabled with IRQ 27
pcieport 0000:00:01.3: AER enabled with IRQ 28
pcieport 0000:00:03.1: AER enabled with IRQ 29
pcieport 0000:00:01.1: Signaling PME with IRQ 26
pcieport 0000:00:01.2: Signaling PME with IRQ 27
pcieport 0000:00:01.3: Signaling PME with IRQ 28
pcieport 0000:00:03.1: Signaling PME with IRQ 29
pcieport 0000:00:07.1: Signaling PME with IRQ 30
pcieport 0000:00:08.1: Signaling PME with IRQ 32
vesafb: mode is 1920x1200x32, linelength=7680, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xf1000000, mapped to 0x00000000813dfcbe, using 9024k, total 9024k
Console: switching to colour frame buffer device 240x75
fb0: VESA VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
00:05: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
QUIRK: Enable AMD PLL fix
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:03:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x00000418
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.15.0-23-generic xhci-hcd
usb usb1: SerialNumber: 0000:03:00.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 9 ports detected
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:03:00.0: Host supports USB 3.1 Enhanced SuperSpeed
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.15.0-23-generic xhci-hcd
usb usb2: SerialNumber: 0000:03:00.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
xhci_hcd 0000:23:00.3: xHCI Host Controller
xhci_hcd 0000:23:00.3: new USB bus registered, assigned bus number 3
xhci_hcd 0000:23:00.3: hcc params 0x0270f665 hci version 0x100 quirks 0x00000418
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.15.0-23-generic xhci-hcd
usb usb3: SerialNumber: 0000:23:00.3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
xhci_hcd 0000:23:00.3: xHCI Host Controller
xhci_hcd 0000:23:00.3: new USB bus registered, assigned bus number 4
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.15.0-23-generic xhci-hcd
usb usb4: SerialNumber: 0000:23:00.3
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
RAS: Correctable Errors collector initialized.
microcode: CPU0: patch_level=0x08001126
microcode: CPU1: patch_level=0x08001126
microcode: CPU2: patch_level=0x08001126
microcode: CPU3: patch_level=0x08001126
microcode: CPU4: patch_level=0x08001126
microcode: CPU5: patch_level=0x08001126
microcode: CPU6: patch_level=0x08001126
microcode: CPU7: patch_level=0x08001126
microcode: Microcode Update Driver: v2.2.
sched_clock: Marking stable (811187729, 0)->(912809738, -101622009)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: d77482c25b833df502ed38a87c5d7f330fdff3cb'
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass! (rc=-19)
evm: HMAC attrs: 0x1
Magic number: 10:155:114
rtc_cmos 00:02: setting system clock to 2018-07-06 06:06:42 UTC (1530857202)
acpi_cpufreq: overriding BIOS provided _PSD data
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 2408K
Write protecting the kernel read-only data: 20480k
Freeing unused kernel memory: 2008K
Freeing unused kernel memory: 1904K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:01:00.0 eth0: RTL8168e/8111e at 0x00000000d502ea2f, c0:25:e9:10:13:a1, XID 0c200000 IRQ 46
r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0 eth1: RTL8168e/8111e at 0x0000000000d13d36, 7c:8b:ca:03:2e:24, XID 0c200000 IRQ 48
r8169 0000:02:00.0 eth1: jumbo features [frames: 9200 bytes, tx checksumming: ko]
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
ahci 0000:03:00.1: version 3.0
ahci 0000:03:00.1: SSS flag set, parallel bus scan disabled
ahci 0000:03:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0x33 impl SATA mode
ahci 0000:03:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
scsi host6: ahci
scsi host7: ahci
ata1: SATA max UDMA/133 abar m131072@0xfd680000 port 0xfd680100 irq 49
ata2: SATA max UDMA/133 abar m131072@0xfd680000 port 0xfd680180 irq 49
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m131072@0xfd680000 port 0xfd680300 irq 49
ata6: SATA max UDMA/133 abar m131072@0xfd680000 port 0xfd680380 irq 49
ata7: DUMMY
ata8: DUMMY
ahci 0000:24:00.2: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:24:00.2: flags: 64bit ncq sntf ilck led clo only pmp fbs pio
scsi host8: ahci
ata9: SATA max UDMA/133 abar m4096@0xfd708000 port 0xfd708100 irq 51
r8169 0000:1e:00.0 eth2: RTL8168h/8111h at 0x0000000078c361fc, 30:9c:23:20:e3:4e, XID 14100800 IRQ 52
r8169 0000:1e:00.0 eth2: jumbo features [frames: 9200 bytes, tx checksumming: ko]
r8169 0000:01:00.0 enp1s0: renamed from eth0
checking generic (f1000000 8d0000) vs hw (e8000000 8000000)
checking generic (f1000000 8d0000) vs hw (f0000000 2000000)
fb: switching to nouveaufb from VESA VGA
Console: switching to colour dummy device 80x25
nouveau 0000:22:00.0: NVIDIA GK208B (b060b0b1)
nouveau 0000:22:00.0: bios: version 80.28.a6.00.34
nouveau 0000:22:00.0: fb: 1024 MiB DDR3
r8169 0000:02:00.0 enp2s0: renamed from eth1
r8169 0000:1e:00.0 enp30s0: renamed from eth2
usb 1-4: new full-speed USB device number 2 using xhci_hcd
ata9: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
usb 1-4: New USB device found, idVendor=046d, idProduct=c52b
usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-4: Product: USB Receiver
usb 1-4: Manufacturer: Logitech
hidraw: raw HID events driver (C) Jiri Kosina
usb 2-3: new SuperSpeed USB device number 2 using xhci_hcd
ata1.00: ATA-10: WDC WD1005FBYZ-01YCBB2, RR07, max UDMA/133
ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
usb 2-3: New USB device found, idVendor=174c, idProduct=55aa
usb 2-3: New USB device strings: Mfr=2, Product=3, SerialNumber=1
usb 2-3: Product: Silicon-Power
usb 2-3: Manufacturer: PHD 3.0
usb 2-3: SerialNumber: 201212SK0582103#0174
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA WDC WD1005FBYZ-0 RR07 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb-storage 2-3:1.0: USB Mass Storage device detected
usb-storage 2-3:1.0: Quirks match for vid 174c pid 55aa: 400000
scsi host9: usb-storage 2-3:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
sd 0:0:0:0: [sda] Attached SCSI disk
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:03:00.0-4/input2
usb 1-5: new full-speed USB device number 3 using xhci_hcd
input: Logitech M325 as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-4/1-4:1.2/0003:046D:C52B.0003/0003:046D:400A.0004/input/input2
logitech-hidpp-device 0003:046D:400A.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech M325] on usb-0000:03:00.0-4:1
tsc: Refined TSC clocksource calibration: 3499.998 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x32734efdd03, max_idle_ns: 440795244944 ns
usb 1-5: New USB device found, idVendor=046d, idProduct=c52b
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5: Product: USB Receiver
usb 1-5: Manufacturer: Logitech
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: ATA-10: WDC WD10EZEX-08WN4A0, 02.01A02, max UDMA/100
ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/100
scsi 1:0:0:0: Direct-Access ATA WDC WD10EZEX-08W 1A02 PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 1:0:0:0: [sdb] 4096-byte physical blocks
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sdb] Attached SCSI disk
logitech-djreceiver 0003:046D:C52B.0007: hiddev1,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:03:00.0-5/input2
input: Logitech K270 as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-5/1-5:1.2/0003:046D:C52B.0007/0003:046D:4003.0008/input/input3
logitech-hidpp-device 0003:046D:4003.0008: input,hidraw3: USB HID v1.11 Keyboard [Logitech K270] on usb-0000:03:00.0-5:2
[TTM] Zone kernel: Available graphics memory: 4092104 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
nouveau 0000:22:00.0: DRM: VRAM: 1024 MiB
nouveau 0000:22:00.0: DRM: GART: 1048576 MiB
nouveau 0000:22:00.0: DRM: TMDS table version 2.0
nouveau 0000:22:00.0: DRM: DCB version 4.0
nouveau 0000:22:00.0: DRM: DCB outp 00: 01000f02 00020030
nouveau 0000:22:00.0: DRM: DCB outp 01: 02011f62 00020010
nouveau 0000:22:00.0: DRM: DCB outp 02: 02022f10 00000000
nouveau 0000:22:00.0: DRM: DCB conn 00: 00001031
nouveau 0000:22:00.0: DRM: DCB conn 01: 00002161
nouveau 0000:22:00.0: DRM: DCB conn 02: 00000200
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
nouveau 0000:22:00.0: DRM: MM: using COPY for buffer copies
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5.00: ATAPI: TSSTcorp CDDVDW SH-224GB, SB00, max UDMA/100
ata5.00: configured for UDMA/100
scsi 4:0:0:0: CD-ROM TSSTcorp CDDVDW SH-224GB SB00 PQ: 0 ANSI: 5
sr 4:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
sr 4:0:0:0: Attached scsi generic sg2 type 5
scsi 9:0:0:0: Direct-Access PHD 3.0 Silicon-Power 2AR1 PQ: 0 ANSI: 5
sd 9:0:0:0: Attached scsi generic sg3 type 0
sd 9:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 9:0:0:0: [sdc] Write Protect is off
sd 9:0:0:0: [sdc] Mode Sense: 23 00 00 00
sd 9:0:0:0: [sdc] No Caching mode page found
sd 9:0:0:0: [sdc] Assuming drive cache: write through
nouveau 0000:22:00.0: DRM: allocated 1920x1200 fb: 0x60000, bo 0000000010fce77f
fbcon: nouveaufb (fb0) is primary device
Console: switching to colour frame buffer device 240x75
nouveau 0000:22:00.0: fb0: nouveaufb frame buffer device
sdc: sdc1 sdc2 sdc3 sdc4 < sdc5 sdc6 sdc7 sdc8 >
sd 9:0:0:0: [sdc] Attached SCSI disk
[drm] Initialized nouveau 1.3.1 20120801 for 0000:22:00.0 on minor 0
clocksource: Switched to clocksource tsc
ata6: SATA link down (SStatus 0 SControl 300)
random: crng init done
EXT4-fs (sdc2): mounted filesystem with ordered data mode. Opts: (null)
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Created slice System Slice.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Reached target Remote File Systems.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Starting Load Kernel Modules...
EXT4-fs (sdc2): re-mounted. Opts: errors=remount-ro
systemd-journald[329]: Received request to flush runtime journal from PID 1
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
audit: type=1400 audit(1530857217.271:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=438 comm="apparmor_parser"
audit: type=1400 audit(1530857217.271:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=438 comm="apparmor_parser"
audit: type=1400 audit(1530857217.271:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=438 comm="apparmor_parser"
audit: type=1400 audit(1530857217.271:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=439 comm="apparmor_parser"
audit: type=1400 audit(1530857217.271:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=436 comm="apparmor_parser"
audit: type=1400 audit(1530857217.271:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=436 comm="apparmor_parser"
audit: type=1400 audit(1530857217.271:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=436 comm="apparmor_parser"
audit: type=1400 audit(1530857217.271:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=436 comm="apparmor_parser"
audit: type=1400 audit(1530857217.271:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=444 comm="apparmor_parser"
audit: type=1400 audit(1530857217.271:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=435 comm="apparmor_parser"
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
snd_hda_intel 0000:22:00.1: Disabling MSI
snd_hda_intel 0000:22:00.1: Handle vga_switcheroo audio client
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC1D0: inputs:
snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:24:00.3/sound/card1/input4
input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:24:00.3/sound/card1/input5
input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:24:00.3/sound/card1/input6
input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:08.1/0000:24:00.3/sound/card1/input7
input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:24:00.3/sound/card1/input8
ccp 0000:23:00.2: ccp enabled
ccp 0000:23:00.2: enabled
kvm: disabled by bios
MCE: In-kernel MCE decoding enabled.
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:22:00.1/sound/card0/input9
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:22:00.1/sound/card0/input10
Adding 5119996k swap on /dev/sdc5. Priority:-2 extents:1 across:5119996k FS
IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
r8169 0000:01:00.0 enp1s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
r8169 0000:02:00.0 enp2s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp30s0: link is not ready
r8169 0000:1e:00.0 enp30s0: link down
r8169 0000:1e:00.0 enp30s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp30s0: link is not ready
r8169 0000:1e:00.0 enp30s0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): enp30s0: link becomes ready
logitech-hidpp-device 0003:046D:4003.0008: HID++ 2.0 device connected.
logitech-hidpp-device 0003:046D:400A.0004: HID++ 2.0 device connected.
nouveau 0000:22:00.0: Direct firmware load for nouveau/nv106_fuc084 failed with error -2
nouveau 0000:22:00.0: Direct firmware load for nouveau/nv106_fuc084d failed with error -2
nouveau 0000:22:00.0: msvld: unable to load firmware data
nouveau 0000:22:00.0: msvld: init failed, -19
nct6775: loading out-of-tree module taints kernel.
nct6775: module verification failed: signature and/or required key missing - tainting kernel
nct6775: Found NCT6795D or compatible chip at 0x4e:0xa20
perf: interrupt took too long (2521 > 2500), lowering kernel.perf_event_max_sample_rate to 79250
perf: interrupt took too long (3159 > 3151), lowering kernel.perf_event_max_sample_rate to 63250